Icom MR-1210RII - Select the Language; Simulation Screen

53
10
OTHER FUNCTIONS
■ Simulation screen
The MR-1210 has a simulation screen capability.
q While holding down [BRILL]/[ ], push [ ] to
turn ON the power.
• The opening screen is displayed.
w After the opening screen disappears, the standby
screen is displayed.
e Push [TX (SAVE)]/[ ] to display the simula-
tion screen.
• On the simulation screen, “Simulation Mode” is dis-
played.
r To return to normal operating mode, turn OFF the
power, then ON again.
■ Select the language
q Push [MENU]/[ ] to enter the Menu screen.
w Push [t] or [u] to select the Initial menu.
e Push [p] or [q] to select the “Language” item.
r Push [ENTER]/[ ] to enter the option selection
mode.
t Push [p] or [q] to select the display language,
“English” or the other*.
y Push [ENTER]/[ ] to save the setting.
u Push [MENU]/[ ] to exit the Menu screen.
* The selectable languages differ, depending on the
display unit’s version.
(MENU > Initial > Language)