13
2
MENU SCREEN
■ AIS List menu
Displays AIS information.
q Push [p] or [q] to select a desired AIS target.
w Push [ENTER]/[ ] to open the detail window.
e Push [p] or [q] to scroll the window.
r Push [CLEAR]/[ ] to close the window.
• When the AIS target is selected, set it to the “Select-
ed AIS target” or register it to “Favorite AIS Target1,
2, or 3.”
q Hold down [ENTER]/[ ] for 1 second to open the
Sub menu.
w Push [p] or [q] to select the option.
Select: Set to the Selected AIS Target.
Add Favorite1, 2, or 3: Register to the Favorite AIS.
D Setting Reset
Resets the settings in the Menu screen other than the
settings in the Initial menu. You can reset only in the
Standby mode. (p. 58)
q Push [ENTER]/[ ].
• The dialog box “Sure?” is displayed.
w Push [ENTER]/[ ] again to reset the settings.
D Factory Reset
Resets the settings to the factory default. You can reset
only in the Standby mode. (p. 58)
q Push [ENTER]/[ ].
• The dialog box “Sure?” is displayed.
w Push [ENTER]/[ ] again to load the factory de-
fault.
■ Initial menu (Continued)
To Next Page
Loading...
