EasyManua.ls Logo

Icom MR-1210RII - Trail Function Operation

Icom MR-1210RII
80 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
21
3
BASIC OPERATION
Trail function
The trail function memorizes echoes continuously or
at constant intervals. This is useful for watching other
vessels tracks, approximate relative speed, and so on.
D Using the Trail function
q Simultaneously push [ENTER]/[ ] and [CLEAR]/
[ ] to turn ON the Trail function.
The trail icon and trail interval are displayed in the upper
left of the screen.
Trail interval counter starts to count up to the trail time.
w All echoes higher than the specified level at the plot-
ted time are memorized and displayed with a gradu-
ated intensity together with the current echoes.
Echoes are displayed with minimum intensity when
is selected.
Hold down [ENTER]/[
] and [CLEAR]/[ ] for 1
second to erase the plotted echoes.
e Simultaneously push [ENTER]/[ ] and [CLEAR]/
[ ] to cancel the Trail function and erase the plot-
ted echoes.
The trail icon and trail interval disappear.
Trail time
Trail indicator
Trail interval counter
D Customizing the trail settings
You can customize the trail settings in the Trail menu in
the Menu screen.
q Push [MENU]/[ ] to enter the Menu screen.
w Push [t] or [u] to select the Trail menu.
e Push [p] or [q] to select the item.
r Push [ENTER]/[ ] to enter the option selection
mode.
t Push [p] or [q] to select the option.
y Push [ENTER]/[ ] to save the setting.
u Push [MENU]/[ ] to exit the Menu screen.
(MENU > Trail > )
The selectable trail settings are as follows:
Refer to the “Menu screen” section for details on each
item or option. (p. 6)
Reference:
Selects the reference of trails, True for real movement
over ground, and Relative for relative movement to
your vessel.
Time:
Selects the trail time from 30 seconds, 1 minute, 3 min-
utes, 6 minutes, 15 minutes, 30 minutes, or
.
Level:
Selects the level of trail from Low, Middle, or High.
Fine Trail:
The Fine trail function makes the trail thin. Selects the
thinness of trails from OFF (normal), 1 (Fine), or 2 (Ex-
tra fine).
Color:
Sets the trail color to Blue, Yellow, Green, Red, Or-
ange, or White.

Table of Contents

Related product manuals