EasyManua.ls Logo

Icom MR-1210RII - BASIC RADAR THEORY; Sidelobe and Indirect Echoes

Icom MR-1210RII
80 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
39
BASIC RADAR THEORY
Indirect echoes
Indirect echoes may be returned from either a passing
vessel, or returned from a reflecting surface, such as a
mast on your own vessel.
Target
Scanner
Mast or
similar obstruction
An echo is reflected at this point.
Your ship
Target
Bridge
An indirect echo from a reflective surface will appear
on a different bearing from the direct (true) echo, but
the distance will be approximately the same for both.
Tr ue echo
False echo
Indirect echo
Tr ue echo
Sidelobe echoes
Radiation can escape on each side of the beam inside
the sidelobes. If a target reflects this radiation, it will be
displayed on the screen as an echo.
Main beam
Sidelobes
Sidelobe echoes usually occur at short ranges and
as a result of large (strongly reflective) targets. They
can be reduced with proper adjustment of the [SEA]/
[ ] control.
See page 18 for details of the [SEA]/[ ] control.
False
echoes
Tr ue
echo
Radar uses a form of electromagnetic radiation that can be reflected off a large vessel, bridge, or other metal ob-
jects that are in proximity. Because of this property, unwanted reflections off some objects may cause false echoes
to appear on the screen where in fact no actual targets exist. Operators should be familiar with the effect of this
phenomena. In some cases, echoes can be reduced.
8

Table of Contents

Related product manuals