Icom MR-1000RII - 2 Menu; Video; Function

2
5
MENU
■ VIDEO
VIDEO MENU
D.RANGE
IR
STRETCH
PULSE
SEA
TRAIL TIME
ON
1 2
LP
MANUAL
AUTO
MID. WIDE
OFF
OFF
SP
6S
3M
15S
6M
30S
15M
1M
TUNE
1 2 34
NAR.
DTUNE
• AUTO : Automatic tuning.
• “A.TUNE” appears for approximately 2 sec-
onds, instead of the screen display, when
first transmitting after turning ON the power.
The unit also retunes in some cases.
• MANUAL : Manual tuning.
Push [u] to select [MANUAL] then push
[q] to activate the manual tuning slider.
Push [t] [u] to adjust the desired tuning
level.
DD.RANGE
Select the dynamic range of the PPI (Plan Position In-
dicator).
• NAR. : Narrow dynamic range. Even weak reec-
tions are displayed as strong reections.
• MID. : Mid dynamic range.
• WIDE : Wide dynamic range. You can easily dis-
tinguish between weak reflections and
strong reections.
DIR
• OFF : Turn OFF the Interference Reduction
function.
•
1 or 2 (ON) : Turn ON the Interference Reduction func-
tion 1 (Low) or 2 (High).
DSTRETCH
• OFF : Turn OFF the echo stretch function.
• ON : Turn ON the echo stretch function.
DPULSE
• SP : Select the short pulse.
• LP : Select the long pulse. LP indicator ap-
pears on the screen.
DSEA
• The characteristic (curve) of a SEA knob can be cho-
sen as the optimal characteristic out of four kinds with
the height of an antenna.
DTRAIL TIME
• 6S,15S, 30S, 1M, 3M, 6M, 15M or
∞ :
Select the plot interval and vector time.
■ FUNCTION
FUNCTIONMENU
POSN DISP
WPT ON
DIST UNIT
BRG
EBL/PI
ZONE ALARM
BEEP
MAG
PT/SB
KM
OUT
ON
OFF
CURS
NM
TRUE
TRUE
IN
RING
OFF
ON
OFF
SHIP
360
˚
R
DRING
• OFF : Turn OFF the xed range ring display.
• ON : Turn ON the xed range ring display.
DWPT
• OFF : Do not display the waypoint on the screen.
• ON : Display the waypoint on the screen.
DPOSN DISP
• SHIP : Display your own ship’s position.*
1
• CURS : Display the cursor position.*
2
*
1
External latitude/longitude data required.
*
2
External latitude/longitude data and bearing data re-
quired.
DDIST UNIT
• NM : Display the distance unit in Nautical Miles.
• KM : Display the distance unit in Kilometers.
DBRG
Select the displayed bearing type, no relation with the
bearing data format (NMEA, N+1 or AUX).
• TRUE : Select the true North bearing.
• MAG : Select the magnetic North bearing.
DEBL/PI (except HDG and CSE) (p. 14)
• TRUE : True or magnetic direction.
• 360°R : Relative direction
• PT/SB : Bow direction
DZONE ALARM
• IN : An alarm sounds when the target comes
into the zone.
• OUT : An alarm sounds when the target goes out
of the zone.
DBEEP
• OFF : Turn OFF* the beep tone.
• ON : Turn ON the beep tone.
* Except for the alarm function.