Icom MR-1220 Series User Manual

61
11
SPECIFICATIONS
External data list
External data list
D External data input
The following external data is/are required to use each functions of the MR-1220 series.
Connector [NMEA 1] *
1
connector [NMEA 2] *
2
connector
Sentence format
THS, HDG, HDM,
HDT
VDM,
ALR,
VDO*
2
RMC, GGA, GLL, GNS,
VTG, WPL, BWC, BWR
DSC,
DSE
N+1, AUX
Function Display Bearing Variation AIS Speed Position Waypoint Variation DSC
Head-Up
H-UP – – – – – – – –
Stabilized Head-Up
SH-UP
Required
– – – – – – –
Course-Up
C-UP
Required
– – – – – – –
North-Up
N-UP
Required
– – – – – – –
True Motion
TM
Required
– – –
RMC, GGA,
GLL, or GNS
– – –
Speed Display
SOG – – – RMC or VTG – – – –
Heading Bearing
HDG
Required
– – – – – – –
Waypoint
Waypoint
Required
– – –
RMC, GGA,
GLL, or GNS
WPL,
BWC, or
BWR
– –
Own Vector
–
Required
– – RMC or VTG – – – –
ARPA
ARPA
Required
– – RMC or VTG – – – –
Cursor/Waypoint
Estimated Time of
Arrival
– – – – RMC or VTG – – – –
Magnetic Variation
(Auto)*
3
–
Required
HDG – – – – RMC –
TLL
–
Required
– – –
RMC, GGA,
GLL, or GNS
– – –
AIS (Display only)
AIS
Required
– VDM –
RMC, GGA,
GLL, or GNS
– – –
AIS
(CPA/TCPA Alarm)
AIS
Required
– VDM RMC or VTG
RMC, GGA,
GLL, or GNS
– – –
AIS (Own)
MENU – – VDO – – – – –
Alarm Status*
4
– – – ALR – – – – –
DSC
DSC
Required
– – –
RMC, GGA,
GLL, or GNS
– –
DSC,
DSE
D External data output
The radar can output the following sentences through the [NMEA 2] *
1
connector: RMC, GGA, GLL, VTG, TLL,
RSD, and OSD.
*1 [NMEA1] and [NMEA 2] connectors: See the page 44.
*2 AIS input also receives RMC, GGA, GLL, VTG, and GNS sentences.
These are valid only when the NMEA2 input and DSC input do not receive them.
*3 Either an HDG to [NMEA 1] connector or an RMC to [NMEA 2] connector is required.
L THS, HDG, HDM, HDT, RMC, GGA, GLL, GNS, VTG, WPL, BWC, BWR, TTM, TLL, RSD, OSD, DSC, and DSE are the
sentence formats of NMEA0183.
L If the “Bearing Input” item in the Initial menu is set to “GPS” or “GPS-L,” “RMC” of [NMEA 2] connector or COG (Course
Over the Ground) of “VTG” a bow it receives as a direction, even if there is no direction information (compass etc.) in
[NMEA 1] connector, the screen display of the North rise etc. is possible.
However, direction accuracy falls when the speed of a vessel is set to 2 knots or less, or when exceeding 3 knots a bow it
does not receive as direction data. Moreover, the inuence of measurement position accuracy or a current an actual bow
it may differ from a direction.
*4 A system error from the AIS unit is displayed.

Icom MR-1220 Series Specifications

General

Brand	Icom
Model	MR-1220 Series
Category	Marine Radar
Language	English