ICON PLATFORM NANO User Manual

44
QCon Pro X, QCon Pro XS, QCon Pro G2, QCon EX G2 Platform M+,
Platform B+, Platform D2, Platform X+, Platform Nano
Revision v0.71
This is a master manual. Specic device manuals can be built from this material
Congratulations on owning an Icon control surface! This manual documents the full
range of potential functions when the device is installed in Cubase.
You can extensively controlCubase with an Icon QCon seriescontrol surface or Icon
Platform modular control system using standard MackieControl protocol.Expansion
bank units can be addedfor more hands-on controls:QCon expansion units for the
QCon series and the Platform X+ channel bank expansion. Platform B+ button module
is necessary toaccess all functions in this manual with Platform M+, and the D2 display
highly recommended.Icon Metal Fader Caps and Icon Metal Knob Caps are available
as an aesthetic and haptic upgrade for the best control experience.
The term Mackie Control is used to refer to the control protocol standardto be used
withthe QCon and Platform series control surfaces, and is abbreviated as MCP.The
terms , Cubase, and all Cubase-specicterminology belong to Steinberg and has no
afliation with Icon Pro Audio.
<<<<< Table of Contents >>>>>
Setup ………………………………………………. -
Getting Started ………………………………………………. -
Mix and Transport ………………………………………………. -
View ………………………………………………. -
Automation ………………………………………………. -
Encoder Knob Assignment ………………………………………………. -
Utilities ………………………………………………. -
Advanced Conguration ………………………………………………. -
Troubleshooting ………………………………………………. -
AppendixA
Control Surface Functionality Manual
Cubase

ICON PLATFORM NANO Specifications

General

Connectivity	USB
Compatibility	Windows, macOS
Power Supply	USB Bus Powered
Transport Controls	Yes
USB	USB 2.0
Footswitch	1 footswitch connector
Inputs	1 x Footswitch
Faders	1 x Touch-sensitive motorized fader with 10-bit resolution
Display	12-segment LED display