47
The Encoder Knobs edit parameters according to the current Assignment Mode. Turn
them to edit a parameter or change a selection.Each knob affects the channel on that
channel strip, or in advanced encoder modes, allknobs affect the currently selected
channel. Press the knob to reset to the default value, or conrm a selection depending
on the Assignment Mode.
<<<<<<<<<Mix and Transport>>>>>>>>>
Jog Wheel:
Turn the Jog Wheel to quickly adjust the project cursor position on the grid, visible in the Project
Windowin Cubase. Press Scrub to scrub audio with the Jog Wheel. (On Platform M+, scrub is
activated by pressing down the jog wheel.)
Transport:
The Transport section is used to operate playback.
Play = Begin playback
Stop = Stop playback
Rec (transport) = Begin recording Audio and MIDI input
FastForward= Shuttle the project cursor forwards
Rewind =Shuttle the project cursor backwards
To Next Page
Loading...
Need help?
General
