50
<<<<< Pan >>>>>
Pan Assignment:
(Pan)
Press Pan to adjust stereo panning with the Encoder Knobs on their respective channels. Press
Page Up/Down to choose between Left/Right or Front/Rear panning.
Surround Assignment:
(Shift+Pan)
Edit multiple surround parameters for the selected channel. Each Encoder Knob is set to a
different function depending on the current channel Panner set in Cubase: Stereo Dual Panner,
Stereo Combined Panner, Stereo Balanced Panner, or others.
Parameters:
L-R Standard, L-R Panner, Mode
<<<<<Inserts>>>>>
Insert Assignment Mode:
(Plug-In)
Press Insertsto open and edit plug-ins on the selected channel. Assign plug-ins on Page 01, and
edit on Page 02. PressChannel up/down to browse pages. Plug-In parameters appear on the LCD
display and are assigned across the Encoder Knobs.
To quickly insert and edit a plug-in, press Insert, then turn Encoder Knob 3, press Channel down
and then edit parameters on all Encoder Knobs.
<<<<<<<<< Encoder Knob Assignment>>>>>>>>>
Press one of the Assignment buttons to select the category of parameters currently assigned to
the Encoder Knobs. Assignment modes apply controls to the currently selected channel – with
a few exceptions.Use Channelup/down to browse pages of options and parameters.Rotate the
Encoder Knobs to adjust parameters or make a selection from a list.
Assignment Modes:
Pan = Activates Pan Assignment.Edit standard pan or front/rear panning.
Inserts = Activates Insert Assignment.Open plug-ins and access plug-in parameters.
EQ = Activates EQ Assignment.Opens and editsCubase EQonselected channel.
FX Aux = Activates FX Aux Assignment. Open and edit the Channel Strip Rack.
Instrument = Activates Instrument Assignment.Open and edit plug-in instruments.
SendPage Down = Activates FX Send Assignment.Setup and editFX sends.
Master FX = Activates Master FX Assignment.Setup and editFX sends.
Page Up, Routing= Activates Routing Assignment.Setup and editFX sends.
Fader Flip:
Press Flip to access the current Encoder Knob parameters on the touch sensitive motor faders.
This is great for precise adjustments of multiple channels/parameters and managing automation.
To Next Page
Loading...
Need help?
General
