ICON PLATFORM NANO User Manual

51
Band 1 Gain Band 2 Gain
Band 1 Frequency Band 2 Frequency
Band 3 Gain Band 4 Gain
Band 3 Frequency Band 4 Frequency
Band 1 Q-Factor Band 2 Q-Factor
Band 1 Bypass Band 2 Bypass
Band 3 Q-Factor Band 4 Q-Factor
Band 3 Bypass Band 4 Bypass
<<<<<FX Aux>>>>>
FX Aux Assignment Mode:
In FX Aux Assignment Mode, edit settings forChannel Strip Rack modules. Browse parameters
with Channel up/down.
<<<<<Instrument>>>>>
Instrument Assignment Mode:
Press Instrument to open and edit instrument plug-ins on the selected channel. Assign plug-ins
on Page 01, and edit on Page 02. PressChannel up/down to browse pages. Plug-In parameters
appear on the LCD display and are assigned across the Encoder Knobs.
Page 01
Insert Slot # Insert Bypass SelectPlug-In
Page02+
Insert parameters appear automatically assigned across the Encoder Knobs
<<<<< EQ >>>>>
EQ Assignment Mode: (EQ)
Press EQ to open (or add) theCubase EQ. EQ Assignment Modecan only edit a standard Cubase
EQ. Press Flip to control EQwith the faders, and Channel up/down to browse parameters. Edit
multiple EQ bands at once for the selected channel.Press a Freq knob to change to adjusting Q
and press a Gain knob to toggle bypass.
Band 1 Frequency Band 2 Frequency
Band 1 Gain Band 2 Gain
Band 3 Frequency Band 4 Frequency
Band 3 Gain Band 4 Gain
Advanced EQ Assignment Mode: (Shift + EQ)

ICON PLATFORM NANO Specifications

General

Connectivity	USB
Compatibility	Windows, macOS
Power Supply	USB Bus Powered
Transport Controls	Yes
USB	USB 2.0
Footswitch	1 footswitch connector
Inputs	1 x Footswitch
Faders	1 x Touch-sensitive motorized fader with 10-bit resolution
Display	12-segment LED display