53
Cue Send Mode: (Shift+ Send)
Access settings for Cue sends with the Encoder Knobs on their respective channels. Press Shift+
Send to toggle through Cue Send 1-8. Browse parameters with Channel up/down:
Send Amount
Bypass
Pre/Post Fader
Send Panning
Bypass All Sends
Cue Send Mixer Mode: (Shift+ Send - Select a channel - Shift+ Page Down)
Edit advanced parameters for multiple channels. Repeatedly press Shift+ Page Down to toggle
through FX Send 1-8. Each Encoder Knob is set to a different function. Browse parameters with
Channel up/down:
Send Amount
Bypass
Pre/Post Fader
Send Panning
Bus Destination
Bypass All Sends
<<<<<Master FX>>>>>
Master FX Assignment Mode: (Master FX)
Use the Master FX Assignment Mode to edit and adjust effectsloaded in the master insert slots. To
quickly create and edit an FX Send, press Send, then turn Encoder Knob 3, press Channel down
and then edit parameters on all Encoder Knobs.
Page 01
Master FX Slot # FX Bypass Select Plug-In
Page02+
Insert parameters appear automatically assigned across the Encoder Knobs
<<<<<Routing>>>>>
Routing Assignment Mode: (Page Down, Routing)
Edit routing parameters with the Encoder Knobs on their respective channels. Browse parameters
with Channel up/down:
Output Bus
Monitor
To Next Page
Loading...
Need help?
General
