ICON PLATFORM NANO User Manual

59
You can extensively control Logic Pro X with an Icon QCon seriescontrol surface
or Icon Platform modular control system using standard MackieControl protocol.
Expansion bank units can be addedfor more hands-on controls:QCon expansion units
for the QCon series and the Platform X+ channel bank expansion. Platform B+ button
module is necessary toaccess all functions in this manual with Platform M+, and the
D2 display highly recommended.Icon Metal Fader Caps and Icon Metal Knob Caps are
available as an aesthetic and haptic upgrade for the best control experience.
The term Mackie Control is used to refer to the control protocol standardto be used
withthe QCon and Platform series control surfaces, and is abbreviated as MCP. Logic
and its terminology belongs to Apple and has no afliation with Icon Pro Audio
<<<<< Table of Contents >>>>>
Setup ………………………………………………. -
Getting Started ………………………………………………. -
Mix and Transport ………………………………………………. -
Group ………………………………………………. -
View ………………………………………………. -
Encoder Knob Assignment ………………………………………………. -
Automation ………………………………………………. -
Advanced Encoder Assignment Modes………………………………………………. -
User Assignments ………………………………………………. -
Advanced Utilities ………………………………………………. -
Advanced Conguration ………………………………………………. -
Masterclass ………………………………………………. -
Troubleshooting ………………………………………………. -
Firmware Update ………………………………………………. -
Fader Calibration ………………………………………………. -
MCP MIDI Implementation Table ………………………………………………. -
Device Diagnostic ………………………………………………. -

ICON PLATFORM NANO Specifications

General

Connectivity	USB
Compatibility	Windows, macOS
Power Supply	USB Bus Powered
Transport Controls	Yes
USB	USB 2.0
Footswitch	1 footswitch connector
Inputs	1 x Footswitch
Faders	1 x Touch-sensitive motorized fader with 10-bit resolution
Display	12-segment LED display