83
Channel Strip Buttons:
Rec (channel) = Arms thetrack for recording.
Solo = Engage Solo for one or multiple tracks
Mute = Engage Mute for one or multiple tracks
Select = Focuses and selects the track
Jog Wheel:
Press Scrubto toggle the Jog Wheel function between scrub and off. Then turn the Jog Wheel
to adjust the playhead position, visible in the Edit Windowin Pro Tools.(On Platform M+, scrub is
accessed by pressing down the jog wheel.)
Fader Lock:
Press Lock Mix to disable touch sensitive changes to fader position.
<<<<<<<<<View>>>>>>>>>
Time Display:
Thedigitaltime displayshows the current play position in Bars|Beats, Min:Secs, SMPTE Timecode,
Feet+Frames, or Samples, depending on the current selection in the Pro Tools transport window.
Window Shortcuts:
Edit= Toggle Edit Window
Mix= Toggle Mix View
Transport= Show/hide Transport Window
Mem Lock= Show/hide Memory Locations Window
Zoom &Cursor Arrows:
The Cursor Arrows (left, right, up, down) change selections in both Mix View and Edit Window, or
modify zoom in the Edit Window.Press Zoom to activate zoom controls using the Cursor Arrows.
Zoom controls only work in the Edit Window.
(On Platform M+, Zoom is managed by toggling the Zoom buttons and turning the jog wheel.)
<<<<<<<<< Encoder Knob Assignment>>>>>>>>>
Press the Assignment buttons to select the category of parameters currently assigned to the
Encoder Knobs. Press or turn the Encoder Knobs to edit parameters.
Pan Assignment:
Pan = Activates Pan Assignment, view and edit routingfor each track. Press Panagain to toggle
panning left/right on stereo tracks.
Routing Assignment: (QCon Pro X and Platform B+ only)
Assign + Input = Activates I/ORouting, edit inputrouting for each track with the Encoder Knobs.
Press Assign to conrm.
Assign + Output = Activates I/ORouting, edit outputrouting for each track with the Encoder Knobs.
Press Assign to conrm.
To Next Page
Loading...
Need help?
General
