ICON PLATFORM NANO User Manual

85
Suspend= Disable automation on all tracks
<<<<<<<<<Utilities>>>>>>>>>
In=Set the left locator at the playhead position
Out= Set the right locator at the playhead position
Punch= Activate Quick Punch: during playback, tap Record to track and Play to punch out
Undo = Pro ToolsUndo function
Shift +Cmd + Undo = Pro ToolsRedofunction
Save= Pro ToolsSaveproject
Enter= Pro ToolsEnterfunction
Esc/Cancel= Pro ToolsCancelfunction
<<<<<<<<<Modiers>>>>>>>>>
Thefour Modier buttons can be held to alter the function of other commands as dened with Pro
Tools keyboard shortcuts. Some applications for the four modier buttons:
Option + Cursor Arrows =Scrollwindow view in Edit Windowor Mix View
Shift + Cursor Arrows = Extend selection in Edit Window
Control= Clutch: hold bypass grouping for track levels (faders)
Option+ Cursor Arrows(left/right) =Centersselection in Edit Window
Option + Cursor Arrows(up/down) =Subtract track selection in Edit Window
<<<<<<<<< Troubleshooting >>>>>>>>>
Strange behavior in the DAW, unexpected functions, device not recognized, orfreezes:
Disconnect all MIDI-USB devices. In Pro Tools, remove all control surface congurationsin
Setups -> Peripherals -> MIDI Controllers andclose Pro Tools. For testing, connect directly to the
computer without a USB hub or USB extension cable. Turn on the Icon control surface and select
the HUIPro Tools mode.
First check that the specied USB cable is in good condition and well connected. For testing,
connect directly to the computer without a USB hub or USB extension cable.
OSX – Go to Audio-MIDI-Setup, open MIDI Studio, and delete unused congurations and Icon
devices. Restart the Icon control surface to automatically recongure.
Windows –Open the Device Manager in Windows, select the Icon Control Surface, and delete the
device.Now restart the control surface to automaticallyrecongure. If there remain issues related
to the USB connection, a Windows update can repairsome issues.
Windows – If the device does not appear in the Windows Control Panel, you may need to uninstall
MIDI devices - you will need a third party utility application to do this easily. Windows has limits on
MIDI devices successfully installed in total, and MIDI devices remain installed when disconnected.
Finally, start Pro Tools and recongure the control surface in Setups -> Peripherals -> MIDI
Controllers.

ICON PLATFORM NANO Specifications

General

Connectivity	USB
Compatibility	Windows, macOS
Power Supply	USB Bus Powered
Transport Controls	Yes
USB	USB 2.0
Footswitch	1 footswitch connector
Inputs	1 x Footswitch
Faders	1 x Touch-sensitive motorized fader with 10-bit resolution
Display	12-segment LED display