7
BANK < button-Shift “eight” channels up for all faders (except the
master channel).
BANK > button-Shift “eight” channels down for all faders (except
the master channel).
6. Transport control buttons section
PLAY button-Activate the play function of the DAW.
STOP button-Activate the stop function of the DAW.
REC button-Activate the record function of the DAW.
REWIND button-Activate the rewind function of the DAW.
FAST FORWARD button-Activate the fast forward function of the DAW.
LOOP button-Activate the loop function of the DAW.
5a) Jog wheel-
The jog wheel is used for various purposes specic to the
DAW application, including shuttle and scrubbing functions.
5b) Zoom control buttons section
Zoom UP/DOWN button –
The Zoom UP/Down button is used to navigate
up or down through the Graphical User Interface (GUI) of the DAW
application.
Zoom LEFT/RIGHT button-The LEFT/RIGHT button is used to navigate
left or right through the Graphical User Interface (GUI) of the DAW
application.
5. Jog wheel section
7. Assignment section
TRACK button-Activate the track parameters of the software
PAN/SURROUND/EQ/Send/Plug-in/Instrument buttons-These buttons are
used to activate the corresponding effect function of the DAW. They are typically
used in conjunction with the rotary encoder knobs. Press the button, its light will
turn on, and then rotate the rotary encoder knob to adjust the value.
8. LED color-coded function buttons
This section of 8-control buttons are LED color-coded for different functions
on each layer. Switch between the layers usisng the 5-round buttons located
above. They include red, green, blue, purple and yellow. Press any one of the
round buttons to switch between the function layers. Please place the correct
PVC overlay which corresponds to your current DAW to show the function for
each button on each color layer. Please refer to your DAW manual for more
information about the terms and functions listed.
To Next Page
Loading...
Need help?
General
