IconBiT XDS100GL - Digital Audio Device Connection; Connecting to a LAN; Connecting to a WLAN

iconBIT XDS100GL User Manual
13
2.5.6 Digital Audio Device connection
(1) Follow the picture and plug in the Toslink connector on your optical fiber to the player’s
S/PDIF Optical jack; (not supplied);
(2) Follow the picture and plug in the other connector on your optical fiber to the digital
audio device. (not supplied).
2.5.7 Connecting to a LAN
To connect to a LAN (Local Area Network) you require a cat5, cat5e or cat6 network cable
(not supplied).
(1) Connect one of the crystal plugs on the cable to the player’s RJ45 LAN socket;
(2) Connect the other crystal plug on the cable to a RJ45 LAN port on your router, switch, or
hub devices.
2.5.8 Connecting to a WLAN
(1) Make sure the player is powered on;
(2) Plug the Wireless LAN USB Adapter (i.e. Wi-Fi USB Dongle) to the USB HOST port of the
p l a ye r.
Note: The Wi-Fi Dongle is an optional accessory sold separately. (Please refer to ‘3.1.4
Changing Network Settings’ for more details about wireless setup)