START-UP CHECK SHEET
For 90+ Furnace
(Keep this page for future reference)
Dealer Name:
Address:
City, State(Province), Zip or Postal Code:
Business Card Here
Phone:
Owner Name:
Address:
City, State(Province), Zip or Postal Code:
Model Number:
Serial Number:
Type of Gas: Natural: [_
Which blower speed tap is used?
(Heating). (Cooling)
Temperature of Supply Air:
Temperature of Return Air:
LP: _1
(°F). or(°C).
(°F) or(°C)
Rise (Supply Temp,-Return Temp,): (°F) or(°C).__
Filter Type and Size:
Fan "Time ON" Setting:
Fan "Time OFF" Setting:
Manual Gas Shut-Off Upstream
of Furnace/Drip-Leg?
Condensate Drain Connected?
YES _1 NO _1
YES _1 NO _1
NO_1
Condensate Drain Trapped? YES [_
Transition Pressure switch hose relocated for U/D/H
Application? YES _ NO _
Blower Speed Checked? YES _1 NO _1
All Electrical Connections Tight? YES _1 NO _1
Gas Valve OK? YES _ NO _
Measured Line Pressure When Firing Unit:
Calculated Firing Rate:(See Checks andAdjustments Sec-
tion),.
Temperature Rise (supply-return temperature):(°F)__
Measured Manifold Gas Pressure:
Static Pressure (Ducts): Supply Air Return
Date of Start-Up:
CO ?
0O2 ?
Dealer Comments:
44001 101004
To Next Page
Loading...