22
Code LCM Display Function Description Accessibility
110
Change Mgmt. Set the Change Return Mode
Default Definition
Highest Value
Setup change return by the original coin value or by the highest coin value.
Org. Coin Value: return by original inserted sequence.
Highest Value: return starting from highest coin value. When changer cannot
return by highest value, it returns by original coin value.
Note! This function only works with the JPSTD interface
LCM Descriptions
Press the Manual button.
Use A / C to scroll to EZ code 110.
Press F to enter.
Press F to change its current setting.
(Highest Value/Original Coin Value)
When finished, press Manual button to exit.
Manual to exit.
Code LCM Display Function Description Accessibility
111
Idle Display Set the Standby LCM Display Mode
Default Definition
Coin Q’TY
Change coin changer's LCM display in standby status.
Coin Q'TY: display coins in each tube.
Total Coin Value: display total amount of vending.
LCM Descriptions
Press the Manual button.
Use A / C to scroll to EZ code 111.
Press F to enter.
Press F again to change display method.
(Coin Q'TY/Total Coin Value)
When finished, press Manual button to exit.
Manual to exit.
Highest Value
"F" to Chan
To Next Page
Loading...
Need help?
General
