To Next Page

To Previous Page

10.

Read Audit Data

This document provides detailed audit data read out steps as following methods:

Read audit data by ICT MTB

Read audit data by IrDA

10.1. Read Audit Data by ICT MTB

10.1.1.

Tools

Please prepare download box and related wire accessories ready

1. Tool Kit Box: MTB x 1pc

2. Cable-wires:

#WEL-RSB04 x 1pc

10.1.2.

Connection

10.1.3.

Start Read Audit Data by MTB

1. Prepare connection above and set changer in standby status for data read out.

2. Turn on MTB power and enter “Changer Operate” mode.

3. Select “Read Audit Data” to execute read out process, the .eva audit data will be

saved to SD card of MTB.

Then MTB request whether to clear audit data in changer? Choose Yes/No to determine

whether to clear audit data in changer.

4. Turn off MTB power before disconnection from MTB to Changer. Remove SD card

from MTB to read out .eva file from PC.

*For detail MTB Instruction, please refer to MTB Manual.

Questions and Answers:

Need help?

Do you have a question about the ICT cc6100 and is the answer not in the manual?

ICT cc6100 Specifications

General