26
Code LCM Display Function Description Accessibility
119
CashFloat Mode Set Coin Tube Inventory Counting Mode
Default Definition
Cashfloat Mode
Default amount is the maximum
level of each tube.
Select counting method of coin tube inventory.
Cashfloat Mode: Changer system keeps counting coin number among
tubes. Even after reboot or power reset, coin inventory data remains in
memory.
Sensor Mode: After reboot or power reset, coin changer detects coin
inventory in tubes through low level sensor and high level sensor. Changer
displays N, L or H according to coin amount:
N – Tube empty
L – Coins reach low level amount
H – Coins reach high level amount
Some operational functions are unavailable under sensor mode, including
100, 107, 108, 109 and 111.
LCM Descriptions
Press the Manual button.
Use A / C to scroll to EZ code 119.
Press F to enter.
Changer displays current inventory counting mode.
Press F to change inventory counting method.
Note! When counting method is changed to Cashfloat mode, the
cashfloat setting is changed to maximum amount automatically.
When finished, press Manual button to exit.
Manual to exit.
Cash Float
"F" to Chan
To Next Page
Loading...
Need help?
General
