To Next Page

To Previous Page

Barcode Reader Error

Code: E31

LED Light Display: None

LCM Display: As shown in figure below. The machine will continue to work.

Cause: Barcode Reader error.

Corrective Measure: Ensure that the Barcode

Reader is not dirty or blocked by foreign objects.

If yes, then clean the Barcode Reader or remove

the obstruction.

Caution: The machine would continue to work

despite the Barcode Reader error.

Coin Size LED Error

Code: E32

LED Light Display: None

LCM Display: As shown in figure. The machine will continue to work.

Cause: The three sets of LEDs used to distinguish Coin size have been damaged.

Corrective Measure: Open the deck. Ensure that the Sensor and LED are not

dirty or blocked by foreign objects. If they are, then clean

the Sensor and LED or remove the obstruction. If the

problem cannot be solved, notify ICT personnel for support.

BarCode Sensor

Error E31

Diameter Sensor

Error E32

Questions and Answers:

Need help?

Do you have a question about the ICT cc6100 and is the answer not in the manual?

ICT cc6100 Specifications

General