EasyManua.ls Logo

iData 70 - 7 Precautions and Troubleshooting; 7.1 Precautions for iData 70

iData 70
32 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
iData 70 User Manual
- 22 -
7 Precautions and Troubleshooting
7.1 Precautions for iData 70
To ensure that the iData 70 does not fail, follow the following precautions during use
of the iData 70:
Put the iData 70 and its components and accessories in the places where children
cannot reach.
Keep the iData 70 dry. Rain, moisture and liquid contain acidic materials and will
corrode the circuit board.
Do not store or use the iData 70 in dusty or dirty places.
Do not store the iData 70 in a place that is too hot. High temperature will shorten the
service life of electronic components.
Do not store the iData 70 in a place that is too cold. When the temperature inside the
iData 70 rises, moisture is generated inside the iData 70, which may damage the circuit
board.
Do not try to disassemble the iData 70. Otherwise, the iData 70 may be damaged.
Do not touch the screen surface of the iData 70 by using a pen, a pencil or other sharp
articles in case the screen may be scratched.
Do not throw, beat or violently collide the iData 70. Otherwise, the components of the
iData 70 may be damaged and the iData 70 may be faulty.
Do not use strong chemical products or strong detergent to clean the iData 70. If the
iData 70 become dirty, clean the surface of the iData 70 by using a soft cloth soaked
with dilute glass detergent.
Please use the protective film to reduce wear as much as possible. The screen
protective film can improve the availability and durability of the screen.
Pay attention to the following during use of the battery.
The area where the iData 70 is charged must keep away from scraps, inflammables or
chemical substances.
When you charge the battery of a mobile device, the temperature on the battery and
charger must be in the range 0C to 40C.
Do not use incompatible batteries or chargers, which may cause fire, explosion, leakage
or other hazards.
Do not disassemble, press, twist, pierce or cut the battery.
Do not make the battery short-circuited or contact the connecting terminal of the battery
by using metal or other conductive objects.
Do not insert other materials into the battery, contact the battery with water or other
liquid, or expose the battery in an open fire, explosive source or other sources of
danger.
Do not put or store the battery in the environment where the temperature is too high.
Do not put the battery in a microwave oven or a drying machine.

Related product manuals