IDEAL Networks NaviTEK NT - Page 17

NaviTEK NT 153800 Iss 1
User Guide Page 17
With an active remote termination the possible faults detected are:
Fig 20 Open circuit by pin
Fig 21 Short circuit by pin
Fig 22 Crossed pairs
Fig 23 Split pairs
Fig 24 Bridged shorts
Fig 25 Remote shorts
The indications that follow appear on the Active Remote device:
• Flashing green LED – Test Passed.
• Flashing red LED – Test Failed.
• Amber LED – DC voltage greater than 12 Volts detected – cannot perform test.