NaviTEK NT 153800 Iss 1
User Guide Page 23
Displays
Screen
LCD
Used for – Display of setup functions and results
Location – Front
Size – 2.8 inch diagonal
Type – QVGA Colour
Pixels – 240 x 320
LEDs
Charger LED
Used for – Indication of charging status
Colour – Green
Location – Bottom of optional power module
(Not present in standard alkaline battery pack)
RJ45 Link LED
Use– ON indicates link UP
Colour - Green
RJ45 Activity LED
Use – Flashing indicates link activity
Colour - Green
Ports
RJ45
Setup
Auto Negotiation – Enabled
- Disabled
Speed – 10Mbps
- 100Mbps
- 1Gbps
Mode – Full Duplex
- Half Duplex
MDI - AUTO
- MDI
- MDIX
Min Rx Size – 19-99 bytes
MAC – Factory set
Tests
Ethernet Mode - Ping4
- Ping6
- Trace Route4
- Trace Route6
- Hub Blink
- Auto (Ping, Trace Route,)
Cable Mode - Wiremap
- Tone Generator
- Auto (Wiremap)
Service Detection
Detected Services - PoE (802.3af/at. Not Cisco pre-standard)
- ISDN S
- PBX
- Unknown
To Next Page
Loading...
