Ideal-Standard Easybox Slim A5959AA - User Manual

40
EASYBOX SLIM
Built-in dual-control thermostatic shower valves in this product range are:
A5877AA Circular escutcheon with on/off ow control
A5878AA Square escutcheon with on/off ow control
A5879AA Circular escutcheon with 3 function diverter (to bath, off, or shower)
A5880AA Square escutcheon with 3 function diverter (to bath, off, or shower)
A5958AA Shower pack: ow control, circular escutcheon, 3 function kit & wall elbow
A5959AA Shower pack: ow control, square escutcheon, 3 function kit & wall elbow
IMPORTANT
BEFORE CONNECTION, FLUSH WATER
THROUGH PIPEWORK TO REMOVE ALL
DEBRIS ETC. WHICH COULD DAMAGE
THE VALVE MECHANISM
Installation Instructions
Thermostatic Built-In Shower Valves
INSTALLER
After installation please pass
this instruction sheet to user
40
Low prole valves suitable for slim duct systems

Ideal-Standard Easybox Slim A5959AA Specifications

General

Type	Control Unit
Model	A5959AA
Brand	Ideal-Standard
Material	Plastic
Color	White
Dimensions	120 x 80 x 40 mm
Installation Type	Wall-mounted
Compatibility	Compatible with Ideal Standard products
Mounting	Screws

Summary

2 Supply Conditions

4 Pre-Installation Notes

4.2 Kit-1 Mounting Depth Control

Ensures valve-box is level and correctly positioned within wall depth markers for proper fit.

4.3 Mounting Options Overview

4.5 Valve-Box Orientation

Emphasizes correct valve-box orientation for handle positions and escutcheon markings.

4.7 Valve-Box Sealing System

5 Installation Guide - Kit 1

5.1 Connecting Pipe-Work Preliminary

Guides on connecting hot and cold water supply pipes to the valve-box before mounting.

5.2 Mounting Methods

Details attachment methods using the mounting bracket or optional fixing legs.

5.3 Using Optional Adjustable Fixing Legs

5.4 Mounting Valve-Box into Solid Wall

Covers cavity and false-partition methods for installing the valve-box into solid walls.

5.5 Mounting Valve-Box into Pod Wall

5.7 Mounting Valve-Box into Timber Stud Wall

5.8 Completing Pipe-Work

6 Preparation for Chrome Trim (Kit-2)

6.1 Trimming Valve-Box for Trim

6.2 Installation of Chrome Trim (Kit-2)

Explains how to screw in the up-stand bolts and prepare for fitting the valve-box lid.

7 Operation

7.1 Temperature Control Operation

Explains how to adjust water temperature using the lower control handle.

7.2 On;Off Flow Control Operation

7.3 3 Function Diverter Operation

9 Calibration of Thermostat

10 Isolating Valves & Maintenance

10.1 Commissioning & Periodic Checks

Details procedures for commissioning the valve and performing 12-monthly checks.

10.2 Frequency of Regular Servicing

11 Thermostatic Cartridge Replacement

12 Flow Cartridge Replacement

13 Diverter Cartridge Replacement

14 Check-Valve Cartridge Replacement