- 48 -
AP 40
Care and Maintenance
1.
Changing Filters
①
When the Filter Replacement Reminder light is illuminated or blinking,
it is a signal to replace one of the filters. Refer to the intervals below.
Filter Indicator Light
Interval for
cleaning/
maintenance
Interval
between filter
changes
Pre-filter
-
Twice per
month
Semi-
permanent
Carbon
deodorization filter
Steady
light
-
Every 12
months
Anti-microbial
HEPA filter
Ú Intervals between filter changes may vary depending on the environment.
Ú The service life of the Anti-microbial HEPA filter may be extended if it is vacuumed
about
once a month.
②
After replacing a filter, press the RESET
button for at least 5 seconds.
5 seconds
CleanCel
®
Pre-fi lter
Anti-microbial True HEPA
Filter
Carbon
deodorization fi lter (CD)