28
UIN DESCRIPTION
220925 Multiline Starter Kit 80/125
220926 Multiline Extension Kit 80/125
220927 Multiline Starter Kit 100/150
220928 Multiline Extension 100/150
EVOMAX MODEL OUT-
PUT
CASCADE SYSTEM LIMITS COMBUSTION PRODUCTS DATA
Model
Maximum
System
Capacity
Maximum
Permissible Header
Pressure ‘A’
(Static)
Max rate
CO₂
Min rate
CO₂
Temperature
Max
Max Min Hmax Pmax ±0.5 ±0.5
kW kW kW Pa % % C
30 7.5
400 40
9.7 9.0
72
40 10
60 15
80 20
100 25
600 80120 30
150 37.5
30P 7.5
400 40 11.4 10.6
40P 10
60P 15
80P 20
At the maximum system capacity the static
pressure generated against the flue resistance
at position [A] must not exceed the value Pmax
quoted in the table below.
* Multiline flue supplied to point A.
Customers are to fabricate / supply B
type flue system to termination point
within flue resistance parameters.
Flue height = 570mm from the top of the first boiler in the system.
Increase the height 29mm for each adjacent boiler.
Customer specified
components*
Must be CE approved
A*
A*
3.0ºC
Condensate Drain
(Siphon)
Header
To Next Page
Loading...
