iDect Loop Plus Twin - Installing Your Phone; Connecting the Base Station; Handset Battery Installation and Charging

10
2 INSTALLING YOUR PHONE
2.1 Connecng the Base Staon
1) Plug the mains power cable and telephone line
cord into the base staon.
2) Plug the power adapter into a 100 - 240Vac, 50 -
60Hz mains power socket, and the telephone line
cord into a telephone line socket.
Warning:
Always use the cables provided in the box.
Use only the supplied adaptor. Using other power cables may damage the
unit.
Note:
Place the base unit within easy reach of the mains power socket.
Never try to lengthen the mains power cable.
The base staon needs mains power for normal operaon, and the
cordless handsets will not work without it.
2.2 Installing and Charging the Rechargeable Baeries in the
Main Loop Handset
1) Insert the 2 supplied baeries into the baery
compartment, observing the correct polarity
(see markings inside baery compartment).
Warning: Use only the supplied NiMH
rechargeable baeries.
2) Place the back cover over the back of the
handset and press down unl it clicks into
place.
3) Place the handset on the base and charge for
15 hours before using the handset for the rst
me.