iDect Loop Plus Twin - Handset Settings: Direct Call and Alarm

32
6.1.3. Set the Time, Date, and Year
1. Press
M
and
.
to select HS SETTINGS.
2. Press
M
and
.
to select DATE & TIME.
3. Press
M
and
.
to select SET TIME.
4. Press
M
then enter the me informaon according to 12 HR or 24
HR format. The me will be in the format you set.
5. Press
M
then enter the year informaon. The last two digits of the
year will ash for year input.
6. Press
M
then enter the date informaon according to DD-MM-YY or
MM-DD-YY format. The date will be in the format you set.
7. Press
M
to conrm.
6.2 Handset Sengs
6.2.1. Set the Direct Call
You can set a number to call directly when you press any key except
M
in idle mode.
1. Press
M
and
.
to select HS SETTINGS.
2. Press
M
and
.
to select DIRECT CALL.
3. Press
M
and
.
to select ON or OFF.
4. Press
M
to conrm.
If ON is selected in step 3:
1. Use the keypad to the direct call number.
2. Press
M
to conrm, the handset returns in idle mode.