iDect Loop Plus Twin - System PIN and Phone Reset

39
6.3.3. Change the System PIN Code
A 4-digit system PIN code is used for changing the system sengs of the
base staon. It is used to protect your phone against unauthorized use.
The default system PIN code is 0000.
1. Press
M
and
.
to select BS SETTINGS.
2. Press
M
and
.
to select CHANGE PIN.
3. Press
M
.
4. Enter the old system PIN.
5. Press
M
then enter the new system PIN.
6. Press
M
then enter the new system PIN again.
NOTE
If the new PIN entered in Step 6 is not matched with the new system PIN entered
in Step 5, you are requested to enter the valid system PIN again in Step 5.
7. Press
M
to conrm.
6.4 Reset Your Phone
You can reset your phone to the default sengs. Aer reset, all your personal
sengs, call list entries and redial list entries will be deleted, but your
phonebook remains unchanged.
1. Press
M
and
.
to select DEFAULT.
2. Press
M
and you are requested to enter the 4-digit system PIN.
3. Enter the 4-digit system PIN.
4. Press
M
to conrm
5. Press
M
to re-conrm.