iDect Loop Plus Twin - Handset Settings: Alert Tones and Language

36
NOTE
The respecve ringer volume will be played during your selecon.
5. Press
M
to conrm.
6.2.6. Set Alert Tones
A single beep is emied when you press a key. You can turn on or o the
key tone. You can also turn on the alert tones when low baery and out
of range are detected. Low baery tone will be emied while you are
talking with the phone to alert you that you need to charge your baery.
1. Press
M
and
.
to select HS SETTINGS.
2. Press
M
and
.
to select TONE SETUP.
3. Press
M
and
.
to select KEY TONE, BATTERY TONE or OUT OF
RANGE.
4. Press
M
and
.
to turn on or o these tones.
5. Press
M
to conrm.
6.2.7. Set the Language (Varies Among Models)
1. Press
M
and
.
to select HS SETTINGS.
2. Press
M
and
.
to select LANGUAGE.
3. Press
M
and
.
to select your desired language.
4. Press
M
to conrm.
NOTE
If you want to change the language back to English, press
M
and then
<*364#> in idle mode.