iDect Loop Plus Twin - Handset Settings: Ringer Melody and Volume

34
-
During paging or ringing, the alarm will not sound when the alarm me
is reached. However, if snooze funcon is enabled, the alarm will sound
again at the end of the snooze period provided that it’s not ringing or in
paging mode at the end of the snooze period.
1. Press
M
and
.
to select HS SETTINGS.
2. Press
M
and
.
to select ALARM.
3. Press
M
and
.
to select ON or OFF.
4. Press
M
to conrm.
If ON is selected:
1. Press
M
then use the keypad to enter the me.
2. Press
M
to conrm. The display shows the current me and date,
and you are prompted to set the snooze funcon.
3. Press
M
and
.
to select ON or OFF.
4. Press
M
to conrm.
6.2.3. Set the Ringer Melody for External Calls
You can set the melody to personalize your internal ringer. A total of 10
melodies are provided for your selecon.
1. Press
M
and
.
to select HS SETTINGS.
2. Press
M
and
.
to select RING SETUP.
3. Press
M
and
.
to select EXT RING.
4. Press
M
and
.
to select the desired ringer melody.