iDect Loop Plus Twin - Answering Machine (For Models with TAM Base); Answering Machine Operation

45
8 ANSWERING MACHINE (FOR MODELS WITH TAM
BASE)
A telephone with TAM base includes a telephone answering machine that
records unanswered calls when it is switched on. The screen message
counter (two digits) seven segment display on the base will show the
number of the messages when the answering system is on. The answering
system can store messages with the total duraon of up to 15 minutes.
As well as recording incoming messages, you can record memos for other
users of your phone. If the answering system memory is full, the handset
will display TAM FULL and the handset name alternavely in standby,
or display TAM FULL and the date / me informaon in standby which
depends on which opon has been selected in the handset setup.
8.1 Switching TAM On/O
You can turn the answering system on or o through the base or handset.
When the answering system is set to ON, calls will be answered aer the
set answer delay and the caller can then leave you a message. When the
answering system is set to OFF, calls will be answered aer 10 rings and
the answer only message will be played to your callers. They will not be
able to leave you a message.
Using the telephone base:
Press <ANS ON/OFF> on the base to turn the answering system on or o.
Using the handset:
1. Press
M
and
.
to select ANS. MACHINE.
2. Press
M
and
.
to select TAM ON/OFF.
3. Press
M
and
.
to choose ON or OFF.
4. Press
M
and
.
to conrm.