iDect Loop Plus Twin - Handset Registration

40
6.5 Register a Handset
Your handset is pre-registered to the base staon. Up to ve handsets can
be registered to a a single base staon.
If for some reason, the handset is not registered to the base staon,
REGISTER” will be displayed on the handset screen, register your handset
following the process below.
1. Press and hold
on the base staon for about ve seconds, the base
staon is entered into registraon mode.
2. Press
M
and
.
to select REGISTRATION.
3. Press
M
and you are requested to enter the 4-digit system PIN.
4. Enter the 4-digit system PIN and press
M
to conrm.
NOTE
If the handset registraon is successful, the handset will automacally
be allocated the next available handset number. This handset number is
shown in the handset display in standby mode.