iDect Loop Plus Twin - Page 17

17
More blocks indicate a stronger recepon signal.
Less blocks indicate a weaker recepon signal.
Indicates a call is in progress.
Flashes when there is an incoming call.
Indicate that the ringer is switched o.
Steady when an alarm is set. Flash when the alarm me set
before reaches.
Indicate that the keypad is locked.
Indicate when the baery is fully charged.
Whole icon ashes when the baery performs inial charging.
Internal block icon ashes when the baery is in nal charging
stage.
Indicate when the baery needs charging.
Flash when low baery power level is detected.
Indicate new TAM message / new call in TAM message list / call
list.
Indicates the speakerphone is turned on.
Indicate when there are received new Visual Message Waing
(VMWI) not yet read. Will disappear when all the visual
messages have been read.
Indicates when the handset booster is acvated.