Idemia MorphoWave Compact - Deployment Environment; Environmental Operating Conditions

IDEMIA DOCUMENT – REPRODUCTION AND DISCLOSURE PROHIBITED
General precautions
Do not expose the terminal to extreme temperatures.
When the environment is very dry, avoid synthetic carpeting near the MorphoWave Compact terminal, to
reduce the risk of unwanted electrostatic discharge.
Areas containing combustibles
Do not install the terminal in the vicinity of gas stations or any other installation containing flammable or
combustible gases or materials. The terminal is not designed to be intrinsically safe.
The terminal should be installed in controlled lighting conditions
Avoid exposure of the biometric sensor to direct sunlight.
Deployment Environment
9
Operating temperature
-
10°to + 55 °C (14°to 131°F) when ECO-Mode ON
-
10°to + 45 °C (14°to 113°F) when ECO-Mode OFF
Operating
humidity
10 % < RH < 80 % (non condensing)
Storage
temperature
-
25°to + 70 °C (-13°to 158°F)
Storage
humidity
5% < RH < 95 %
IP code
IP65 rated
Step one : overview
IDEMIA - 2018_2000035854 – V1
Do not deactivate ECO-mode when working at a temperature above 45°C (113°F), to avoid over-
heating.