Need help?Do you have a question about the idp SMART-50S and is the answer not in the manual?
Details the external features of the SMART-30 printer, including front and back views.
Details the external features of the SMART-50 printer, including front and rear views.
Explains the internal components of the SMART-30 printer, such as the output hopper and print head.
Explains the internal components of the SMART-50 printer, including the output hopper and print head.
Describes the ribbon cartridge, take-up parts, supply parts, and disposable cleaning roller.
Details the LCD display and button operations for the SMART-50 printer.
Provides a table detailing various printer status messages and their descriptions.
Lists and describes various error codes for the card printer.
Lists and describes various error codes specific to the laminator function.
Step-by-step guide on how to install the ribbon and cleaning roller into the printer.
Instructions on how to properly load plastic cards into the input hopper.
Explains how to remove printed cards from the SMART-30 and SMART-50 stackers.
Detailed steps for installing the printer driver on Windows XP, 2000, and 2003.
Detailed steps for installing the printer driver on Windows Vista, 7, and 8.
Guide on connecting the printer to a network, covering port connections and configuration.
Covers accessing and modifying printer properties via the 'General' tab.
Introduction to the CardPrinterSetup utility for adjusting printer settings.
Guides on performing various tests for printer functions like encoding and printing.
Instructions for upgrading the printer's and laminator's firmware.
Steps to install drivers for the contact smartcard reader.
Steps to install drivers for the contactless smartcard reader.
Detailed steps for cleaning the printer using a cleaning card.
Guide on replacing the thermal print head and configuring its settings.
Addresses problems with card feeding, transfer, and print quality.
Covers ribbon errors, printer not operating, and LCD display messages.
Technical specifications for SMART-30S and SMART-30R models.
Technical specifications for SMART-50S and SMART-50D models.
Technical specifications for the SMART-50L model.
General| Print Technology | Dye-Sublimation |
|---|---|
| Print Resolution | 300 dpi |
| Connectivity | USB 2.0, Ethernet |
| Monthly Duty Cycle | Up to 10, 000 cards |
| Card Capacity (Input) | 100 cards |
| Card Capacity (Output) | 40 cards |
| Paper Size | CR80 (Standard Card Size) |
| Print Capability | Single or Dual Sided |
| Supported Card Thickness | 15-40 mil |
| Supported Card Size | ISO CR80 (53.98mm x 85.60mm) |
| Weight | 4.5 kg |
To Next Page
