Need help?Do you have a question about the idp Smart-30 and is the answer not in the manual?
Overview of the printer's fundamental features and components.
Details external functional features of the Smart Printer with numbered labels.
Describes internal components and functional features of the Smart Printer.
Shows the printer's LED and button for status indication and operational control.
Guides on how to properly install the ribbon and cleaning roller.
Instructions on how to adjust the card thickness setting for proper card feeding.
Steps on how to properly load plastic cards into the Smart Printer.
Lists product specifications for SMART-30S and SMART-30D models.
Diagram showing the location of various sensors within the printer.
Exploded view showing the thermal head and different rollers.
Diagram illustrating the location of various motors and the fan.
Instructions for disassembling the side, front, and rear covers.
Steps for disassembling the thermal print head and top cover components.
Steps for accessing and disassembling main PCBs and drive units.
Overview of the CardPrinterSetup utility for printer configuration.
Details on basic setup window parameters in the CardPrinterSetup utility.
Guides for adjusting printing location, density, and thermal head replacement.
Configuration options for printer security including password and authentication.
Instructions for using the CardPrinterTest program to test printer functions.
Testing magnetic, contact, and contactless smart card encoding.
Information on printer status codes and detailed error descriptions.
Resolving common issues with ribbon, card handling, sensors, and power.
Troubleshooting guides for print quality problems like color, density, and dust.
Troubleshooting issues with magnetic stripe encoding and read/write operations.
Categorized list of service parts including boards, sensors, and cables.
Exploded views of various assemblies like TOP_COVER and LEFT-1.
Exploded views of major printer assemblies like LEFT-1 and RIGHT-1.
Installation and wiring details for the MS Magnetic Stripe option.
Steps for installing and wiring the Flipper option unit.
Installation and wiring instructions for the Contact Encoder option.
Steps for installing and wiring the Contactless Encoder option.
Main parts and assembly procedure for the USB HUB.
Main parts and installation guide for the Ethernet Option.
General| Print Technology | Dye-Sublimation |
|---|---|
| Print Resolution | 300 dpi |
| Card Capacity (Input) | 100 cards |
| Print Speed (Monochrome) | 720 cards/hour |
| Connectivity | USB |
| Operating System Compatibility | Windows 7, 8, 10 |
| Card Size | ISO CR80 (85.6mm x 54mm / 3.375" x 2.125") |
| Card Thickness | 0.38mm (15mil) ~ 1.0mm (40mil) |
To Next Page
