idp Smart-30 - Printer Administration and Configuration; Printer Setup Utility Guide

2014-03-24
4.1 Setup
Item Explanation
Print Location Set the start position or end position of the printed image.
Print Thickness Set the print thickness of color, resin black, overlay.
Ribbon Operation Set the ribbon moving power
Flipper Set the rotation angle of Flipper
Magnetic Stripe Set the start position of magnetic data.
Ribbon Color Sensor
Recognition
Set the sensor value to distinguish the ribbon color.
Security Set the value for the printer security
Etc. Set the printer’s hardware version and the printer state.
4.1 Setup
4.1.1 Overview
4.1.1.1 Function
SMART Card Printer is delivered in optimized state from factory. However it can be set the setup value using
CardPrinterSetup Utility provided with CD when the unit is disassemble and reassemble or change of part. The
following setup value can be changed using CardPrinterSetup utility.
46