Need help?Do you have a question about the idp SOLID Series and is the answer not in the manual?
Provides instructions on how to connect the power and USB cables to the SOLID-310S/310R and SOLID-310D models.
Provides a step-by-step guide for installing the printer driver on Windows 7, 8, and 10 operating systems.
Introduces the Card Printer Config utility for adjusting optimized settings and configuring the printer after installation or replacement.
Guides users on how to test all printer features using the Card Printer Test program and its various control methods.
Provides instructions on how to update the printer's firmware using the CardPrinterFirmware utility.
Lists common error messages displayed by the SOLID-310 printer and provides corresponding countermeasures.
Details the process of replacing the Thermal Print Head (TPH), including checking the new head and configuring it.
General| Resolution | 300 DPI |
|---|---|
| Card Capacity | 100 cards |
| Connectivity | USB, Ethernet |
| Operating System Compatibility | Windows |
| Card Thickness | 0.3 mm to 1.0 mm |
| Maximum Print Width | 85.6mm |
To Next Page
