idp SOLID Series - Advanced Options

29
3.2. Advanced Options
To change the detailed configuration, In the ‘Layout’ tab shown, Please click
“Advanced…” shown on the bottom of the ‘Layout’ tab of the ‘Preferences’.
 Print Quality : To the print quality(DPI). You can select one among 300 x 300 dpi, 300 x
600 dpi and 300 x1200 dpi.
- 300 x 300 dpi : Supported the Color & Mono printing
- 300 x 600 dpi : Supported the Mono printing only.
- 300 x 1200 dpi : Supported the Mono printing only.
Default is 300 x 300 dpi.
 Reset Default Values: Reset to default.
 Color Correction: You can correct gamma for colors. You need to use
CardPrinterConfig to adjust color densities.
- Main [-100:100] : Correct gamma for all panels
- Yellow [-100:100] : Correct gamma for yellow panel
- Magenta [-100:100] : Correct gamma for magenta panel
- Cyan [-100:100] : Correct gamma for cyan panel
- Black [-100:100] : Correct gamma for black panel
- Overlay [-100:100] : Correct gamma for overlay panel
 Position Processing: Set criteria for resin black processing.
- Color [-32:32]: to set the position of color panels
- Mono [-32:32]: to set the position of resin or mono panel
- Overlay [-32:32]: to set the position of overlay panel