Need help?Do you have a question about the idp SMART-50D and is the answer not in the manual?
Details external features of the SMART-30 and SMART-50 printers, including controls and ports.
Explains internal components of the SMART-30 and SMART-50 printers like output hopper and print head.
Describes the ribbon cartridge, take-up parts, supply parts, and cleaning roller.
Explains status display and button functions for SMART-50 and SMART-30 printers.
Step-by-step guide to installing the ribbon and cleaning roller into the printer.
Instructions on how to properly load plastic cards into the input hopper.
Explains how to remove printed cards from the output stacker.
Detailed steps for installing printer drivers on various Windows versions (XP, Vista, 7, 8).
Guides on connecting the printer to a network and configuring settings.
How to access and view the printer's properties and driver settings.
Guide to adjusting layout, paper, ribbon, color, side, media, and laminator options.
Covers printer sharing, ports, advanced options, color management, and service information.
How to use the Card Printer Setup utility for configuration, basic, and laminator setups.
How to run the Card Printer Test program to check functions like encoding and printing.
Steps to upgrade the firmware for the card printer and its laminator.
Guide to installing drivers for contact smartcard readers, including license and installation steps.
Guide to installing drivers for contactless smartcard readers, covering connection and installation.
Procedure for cleaning the printer using an exclusive cleaning card.
Steps for replacing the Thermal Print Head, including setup and installation.
Troubleshooting steps for problems with card entry, transfer, and errors during movement.
Solutions for problems like spots, wrong colors, lines, alignment, and unplanned colors.
Steps to resolve errors during magnetic stripe encoding.
Troubleshooting for ribbon snaps, "Ribbon Not Found", and printer non-operation.
Detailed specifications for SMART-30S and SMART-30R printers covering printing, cards, and system.
Detailed specifications for SMART-50S and SMART-50D printers, including laminator and encoding.
Detailed specifications for the SMART-50L printer, covering all features including laminating.
General| Print Technology | Dye-Sublimation |
|---|---|
| Card Capacity (Input Hopper) | 100 cards |
| Resolution | 300 dpi |
| Interface | USB, Ethernet |
| Print Capability | Single or Dual Sided |
| Card Thickness | 0.38mm to 1.00mm (15mil to 40mil) |
| Card Size | ISO CR80 - 85.60mm x 53.98mm |
| Memory | 64MB |
| Operating System | Mac OS, Linux |
To Next Page
