idp SMART-50D - Pic.78 Connecting to USB Port; Pic.79 Netadmin Log-In

38
Pic.80 Connecting to USB port
If you are unable to find printer in local
network, please connect printer by
USB. You can setup network by USB.
When you click Refresh, you can find a printer
connected by USB as shown in the Pic.80.
 You don’t need to in
stall device driver for
network
configuration by USB. Please ignore
messages related to device installation.

You can change values of “System
Management” only when you connect a printer
by USB. Please connect a printer by network
to
use all of the functions of Netadmin.exe.
Pic.81 NetAdmin Log-in
Please select a proper printer and click
“connect”
. Please enter password and
click “OK”.
Default password is “admin”.