idp SMART-50D - Pic.100 Advanced; Pic.101 Color Management; Pic.102 Service

51
Pic.102 Advanced
3.3.3.
Advanced
It is available for Working Time setting,
Priority order,
Spool print etc.
in “Advanced” tab. “Advanced” setting
follows MS Windows standard. If you want to change
the setting, please refer to the Window manual.
(It is recommended to maintain default.)
Pic.103 Color Management
3.3.4. Color Management
In “Color management” tab, you can select color
management profile fit to the printer.
SMART-50
uses color profile to express optimal color.
The driver selects color profile automatically to fit
each ribbon.
(It is recommended to maintain default.)
Pic.104 Service
3.3.5. Service
You can recognize printer serial,
printer ID, driver
version, firmware version, type of ribbon & balance
and printer’s status.
You can print the “
technical support sheet” on a card
to check printer’s setup value.
To clean printer, please insert a cleaning card in a
hopper and click “Clean Printer”
. For further details,
please refer “6.1. Cleaning Printer”.
Please refer “4.2.6 Printer Status”
for numbers of
“Printer Status” and “Printer error”