idp SOLID Series - Figure 70 Upgrading the Firmware 1; Figure 71 Upgrading the Firmware 2; Figure 72 Upgrading the Firmware 3

48
“Upgrade firmware” enables to
upgrade firmware of network
module.
 You can choose a firmware file.
Figure 70 Upgrading the firmware 1
 Warning box will be shown during
firmware upgrade for network module.
 It is recommended not to do other work
during firmware upgrade for system
reliability.
 Please do not turn off a printer until the
upgrade is completed.
Figure 71 Upgrading the firmware 2
 When firmware upgrade is completed,
pop-up comes out for reboot. Please
click “Yes”.
 It takes 1 minute to reboot.
 Please click “Refresh” after reboot.
When proper printer shown, please
connect printer by clicking “Connect”.
Figure 72 Upgrading the firmware 3