idp Smart-30 - Start

2014-03-24
47
4.1.1.2 Start
When start the program there will be displayed the password input window. If input the password, the recorded setup
value will be shown and can change that value. The password is saved to SMART Card Printer so even if change to
other PC, it need to input the password to change the setup value.
(SMART Printer is not set its password so if you press O.K, you can see the setup value and can change. Default is no
password)
[ CardPrinterSetup startup ]
[ CardPrinterSetup main window ]
4.1 Setup