idp Smart-30 - LED Status and Button Operation Table; Printer Driver

2014-03-24
13
Please refer LED status and button operation. SMART-30 shows status messages on watchman that installed with
printer driver.
No
Watchman LED
Button
State
상세 설명
1
INIT Error xx
< Retry >
RED
Blink
Retry Error occur in initializing
Error code is displayed when SMART-30 can’t be initialized . Please press
button to re-initialize.
2
SMART - 30
System Ready
BLUE
On
Power System Ready Status SMART-30 is ready. If you press button, power is turned on or off.
3
S m a r t
Unlock Please..
BLUE
On
Printer Locked Status
When activating Physical Key option and SMART-30 is locked by the key,
or activating Root/User authentication option and SMART is locked by the
password. Printer is locked so can’t be operated
4
S m a r t
Verify your PC
BLUE
On
Need to Verify using
Authenticated PC.
When activating PC authentication option and using SMART-30 in other
PC. Printer can’t be operated
5
S M A R T
Printing!
BLUE
On
In Printing SMART-30 is in printing.
6
Print Error xx
< Cancel >
RED
Blink
Cancel
Error occur in printing or
Moving card
Error occur in printing or moving card. If pressing button,, printing will
be canceled.
7
Top Cover Open
< Eject >
RED
Blink
Moving
Card
Top Cover Open Top cover is opened. If pressing button, SMART-30 eject card.
1.1 Printer Basic Information