EasyManua.ls Logo

idp Smart-30 - Printer Error Code

idp Smart-30
187 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
2014-03-24
92
4.2.4.2 Printer Error Code
SMSC_F_CARDIN 0x0000000100000000 // Card In Fail
SMSC_F_MOVETOPRINT 0x0000000200000000 // Moving to Printing Position is Fail
SMSC_F_CARDOUT 0x0000000400000000 // Card Out is Fail
SMSC_F_MOVETOMAG 0x0000000800000000 // Moving to Magnetic Position is Fail
SMSC_F_MOVETOIC 0x0000001000000000 // Moving to IC Position is Fail
SMSC_F_MOVETORF 0x0000002000000000 // Moving to RF Position is Fail
SMSC_F_MOVETOROTATOR 0x0000004000000000 // Moving to Flipper is fail
SMSC_F_MOVEFROMROTATOR 0x0000008000000000 // Moving to Printer from Flipper is Fail
SMSC_F_THUP 0x0000010000000000 // Thermal Print Head Up Fail
SMSC_F_THDOWN 0x0000020000000000 // Thermal Print Head Down Fail
SMSC_F_ICHUP 0x0000040000000000 // IC Head (Contactor) Up Fail
SMSC_F_ICHDOWN 0x0000080000000000 // IC Head (Contactor) Down Fail
SMSC_F_ROTATORTOP 0x0000100000000000 // Card Front Side Flipping to Up is Fail
SMSC_F_ROTATORBOTTOM 0x0000200000000000 // Card Front Side Flipping to Down is Fail
SMSC_F_PRINT 0x0000400000000000 // Error in Printing
SMSC_F_MAGRW 0x0000800000000000 // Magnetic Stripe Track Read/Write Fail
SMSC_E_SEEKRIBBON 0x0001000000000000 // Ribbon Search Error
SMSC_E_MOVERIBBON 0x0002000000000000 // Ribbon Move Error
SMSC_E_NOTH 0x0004000000000000 // Thermal Print Head is not Installed
SMSC_E_THOVERHEAT 0x0008000000000000 // Thermal Print Head Overheat
SMSC_E_EMPTYRIBBON 0x0010000000000000 // Empty Ribbon
SMSC_F_DATA 0x0020000000000000 // Printing Data Error
SMSC_F_CARDBACKOUT 0x0040000000000000 // Card Back Out Fail
SMSC_F_CARDERASE 0x0080000000000000 // Card Data Erase Fail
SMSC_F_INCORRECT_PW 0x0100000000000000 // Incorrect Password
SMSC_F_MAGREADT1 0x0200000000000000 // Magnetic ISO Track 1 Read Fail
SMSC_F_MAGREADT2 0x0400000000000000 // Magnetic ISO Track 2 Read Fail
SMSC_F_MAGREADT3 0x0800000000000000 // Magnetic ISO Track 3 Read Fail
SMSC_F_LOCKED 0x1000000000000000 // Printer Locked
SMSC_F_SPOOLFULL 0x2000000000000000 // Spooler Full
SMSC_F_SET 0x4000000000000000 // Recently Printer Operation Fail
4.2 Test

Table of Contents

Related product manuals