IDS Xwave Training Manual

1.4. Learning to a Receiver
There are two ways you can learn the IDS Xwave Universal Transmitter to an Xwave
Receiver.
1.) Serial Number: When connecting to the Xwave Bus Receiver you can just type the
serial number into location 260 in the installer programming.
2.) Tamper: When prompted, trigger the tamper input on the Universal Transmitter.
IDS Xwave Repeater
The Xwave repeater is an intelligent Xwave wireless repeater that will only repeat learnt
Xwave detector signals and supports a maximum of 16 detectors.
The Xwave repeater can be used to extend the distance that Xwave detectors can be
installed from the Xwave receiver by repeating the Xwave signal up to 100m line of
sight.
It can also be used in situations where wireless signals are not being received due to
building construction, layout or local wireless interference.
Serial Number

IDS Xwave Specifications

General

Brand	IDS
Model	Xwave
Category	Receiver
Language	English