Need help?Do you have a question about the IDS 400 and is the answer not in the manual?
Details on design, construction, back plane, self-monitoring, and control card.
Lists components, mains supply, and cables needed for installation.
Diagrams and steps for connecting the receiver for full installation.
Specific installation details for the IDS BSR model.
Step-by-step guide for installing the battery in the receiver.
Instructions for proper electrical grounding to prevent surges.
Final connection steps for serial, printer, telephone lines, and power.
Explanation of the status lights on the receiver's front panel.
Description of the 16-key alphanumeric keypad and its functions.
Guide to configuring date, time, printer, monitoring program, Sescoa, SIA, plain library, and general settings.
Procedure for testing alarm panel communication with the receiver.
Overview of event types displayed on the LCD, including alarms and system errors.
How to view logged system and alarm events, including navigation and viewing methods.
Guidance on identifying and resolving various trouble conditions reported by the receiver.
Steps to enter and navigate the program mode using the keypad and menus.
Method to directly access settings using menu co-ordinates.
A diagram illustrating the program mode menu structure and direct access.
Information on how the firmware version is displayed and its location.
Configuration of base station ID, master ID, date, time, load defaults, clear un-viewed count, and format options.
Settings for enabling the printer, plain library, and re-printing logged events.
Configuration for event buzzer, relay, and tagged events for specific protocols.
Settings for serial output, including format, date/time stamps, and communication timing.
Configuration of handshake order, duration, delay, and other line card parameters.
Technical information on Sescoa Superfast, DSC 4020, Guard Master, and Watch Manager.
List of Contact ID event codes and their descriptions.
Definitions for control block data codes used in SIA protocol.
Definitions for program block data codes used in SIA protocol.
Definitions for event block data codes used in SIA protocol.
Definitions for environmental block data codes used in SIA protocol.
Wiring details for connecting BSR400 Sout to a PC's 25-pin connector.
Wiring details for connecting BSR400 Sout to a PC's 9-pin connector.
Cable connection details for base-to-base serial communication.
Wiring details for connecting BSR400 Sin to a PC's COMx port.
To Next Page
General